Magical Balancer
4
Installation of Magical Balancer
24
4-4
Attachment of trolley (special accessories)
WARNING
The attachment of the trolley should be performed by a maintenance operator who
has developed sufficient knowledge and operating skill for the Magical Balancer.
Since the positions to install the collars and plain washers vary with the beam width, refer to the
figures for their installation.
Attach the trolley as shown below.
Pass hexagon head bolt (10) through the collars, plate, and hanger.
Secure hexagon head bolt (10) with U-nut (16).
If the beam width is 75 mm, install collar
(12) on the outer side of plate (1).
If the beam width is 100 mm, install collar
(12) on the inner side of plate (1).
beam width
:
75mm
beam width
:
100mm
U-nut(16)
Collar (15)
U-nut(16)
Plate (1)
Plate
(1)
Collar(11)
Collar(13)
Collar(12)
Collar(11)
Collar (12)
Collar
(13)
Hanger
Hexagon bolt(10)
Содержание EDB-130
Страница 45: ...44 8 Dimensional Drawing EDB 50...
Страница 46: ...45 EDB 85...
Страница 47: ...46 EDB 130...