Endo EDB-130, Руководство пользователя

Страница: 28 / 48

Magical Balancer 5 Usage of Magical Balancer
27
5.
Usage of Magical Balancer
5-1
Iinspections before starting the operation
WARNING
 Be sure to perform the inspections before starting the operation.
 If any abnormality is found, immediately stop using the product. Take appropriate
measures before using it.
Using the product without addressing an abnormality is very dangerous, possibly
causing an injury. Never use the product with an abnormality.
5-1-1 Checking before starting up
1
Ensure that there is no kink, deformation, damage, or wear in the wire rope.
2
Ensure that the hook is not stretched or damaged. In addition,
ensure that the hook latch works normally.
3
Ensure that the hexagon socket head cap screw of the wire clip
is not loose. If the screw is loose, tighten it with the following
tightening torque according to the model of the main equipment.
Tightening torque:
5.9 N·m
4
Ensure that there is no crack or wear in the hose.
5
Ensure that there is no crack or wear in the power cable and the
curled cord.
6
Ensure that there is no air leakage from the main equipment and
its control box.
7
When using the trolley, ensure that there is no abnormality in the
rails for the trolley.
8
Ensure that there is no wear or damage in the sling (suspension fitting).
5-1-2 Checking the operation with an empty load
1
Ensure that the grip controller can be controlled smoothly, and it correctly operates as
indicated.
2
Ensure that the anti-jump device will not be activated.
5-1-3 Checking the operation with a load
1
Suspend a load equal or close to the maximum capacity and lift up the load by a short distance
from the ground. Then, ensure that the balancer stops after the “Up” and “Down” operations.
2
Ensure that there is no unusual noise (abnormal noise) or vibration.
Wire clip
Cap screw