background image

Nature 2 Installation

The Nature 2 purification system will be placed inside of the filter 

cartridge. A retention strap has been provided to prevent the Na-

ture 2 (slotted blue cartridge) from falling out of the filter.
Remove the Nature 2 cartridge, handle, and retention strap from 

its packaging (Fig. 47). Loop the retention strap around the Nature 

2 cartridge handle, making sure the location of the strap is above 

the fins on the handle, and interlock the strap end into its locking 

mechanism. Cut the strap down to approximately two inches using 

a pair of scissors (Fig. 48). 

 

 

 

 

 

      

Attach the handle to the main body of the Nature 2 cartridge by 

aligning the hole at the top of the handle to the nipple that’s at-

tached to the main body of the cartridge (Fig. 49).  Make sure 

there is a firm connection between the handle and the main body 

of the cartridge. 
Next, pull the cylindrical floating cage out of the filter body.  
Remove the filter cartridge from the filter body inside the pool, by 

grabbing the top and unthreading the cartridge.  
Insert the Nature 2 into the opening at the bottom of the filter car-

tridge making sure the handle is facing towards the opening (Fig. 

50). The retention strap should prevent the Nature 2. 

cartridge from falling out of the filter cartridge.
Reinstall the filter cartridge and then place the floating skimmer 

cage over top the cartridge.

Fig. 47

Fig. 48

Fig. 49

Fig. 50

 4. Endless Pool Maintenance

Daily:

•  Test for free chlorine (FC) after you swim, or at least a few times 

a week. Add chlorine to maintain FC levels between 0.5 - 1.5 

ppm. As you become familiar with the chlorine demand for your 

pool, you will find that you may not have to test for chlorine as 

frequently in order to maintain a minimum level of 0.5ppm. 

Twice a week:

•  Check and adjust water level. Water should completely cover 

the honeycomb grill where the current is produced. Water 1/2" 

(12mm)  lower  than  this  can  create  a  choppy  current  and  may 

cause your skimmer to draw air into the plumbing lines. Having 

the water level 1" (2,5cm) or more higher that honey comb grill 

will cause more water to get splashed out of the pool, and may 

cause the air relief port on the top of the skimmer body to leak 

water.

•  Test for pH at least twice a week.  Broadcast (i.e. pour chemical 

into current) pH increaser or pH decreaser to maintain levels be-

tween 7.4-7.8.  

10

Содержание 2001779

















Отзывы: