Endace Measurement Systems Limited
http://www.endace.com
EDM01.05-05r1 DAG 3.6E Card User Manual
Copyright, all rights reserved.
1
Revision 6. 8 August 2005.
1.0 PREFACE
Introduction
The installation of the Endace DAG 3.6E card on a PC begins with
installing the operating system and the Endace software. This is followed
by fitting the card and connecting the ports.
The characteristics include card architecture, extended functions, and
system requirements.
Viewing this
document
This document, DAG 3.6E Card User Manual, is available on the
installation CD.
In this chapter
This chapter covers the following sections of information.
•
User Manual Purpose
•
DAG 3.6E Card Product Description
•
DAG 3.6E Card Series Architecture
•
System Requirements
1.1 User Manual Purpose
Description
The purpose of this DAG 3.6E Card User Manual is to describe:
•
Installing DAG 3.6E Card
•
Confidence Testing DAG 3.6E Card
•
Running DAG Card Data Capture Software
•
Synchronizing Clock Time
•
Data Formats Overview
Pre-requisite
This document presumes the DAG card is being installed in a PC already
configured with an operating system.
A copy of the Debian Linux 3.1 (Sarge) is available as a bootable ISO
image on one of the CD's shipped with the DAG card.
To install on the Linux/FreeBSD operating system, follow the instructions
in the document EDM04.05-01r1 Linux FreeBSD Installation Manual,
packaged in the CD shipped with the DAG card.
To install on a Windows operating system, follow the instructions in the
document EDM04.05-02r1 Windows Installation Manual, packaged in the
CD shipped with the DAG card
