Endace Measurement Systems Limited
http://www.endace.com
EDM01.05-05r1 DAG 3.6E Card User Manual
Copyright, all rights reserved.
5
Revision 6. 8 August 2005.
2.0 INSTALLING DAG 3.6E CARD
Introduction
A DAG 3.6E card can be installed in any free Bus Mastering PCI slot.
Although the driver supports up to four DAG cards by default in one
system, due to band width limitations there should not be more than two
cards on a single PCI-bus.
In this chapter
This chapter covers the following sections of information.
•
Insert DAG 3.6E Card into PC
•
Connecting DAG Card Ports
2.1 Insert DAG 3.6E Card into PC
Description
Inserting the DAG 3.6E card into a PC involves accessing the bus slot,
fitting the card, and replacing bus slot cover.
Procedure
Follow these steps to insert the DAG 3.6E card.
Step 1.
Access bus Slot
Power computer down.
Remove PCI-bus slot cover.
Step 2.
Fit Card
Insert into PCI-bus slot.
Step 3.
Replace bus Slot Screw
Secure card with screw.
Step 4.
Power up Computer
