![background image](http://html.mh-extra.com/html/encore/e9/e9_installation-manual_2406082017.webp)
E9 IN REV. A
17
2 Push the Valet switch
5times
(holding in on the
5th
push
) until one long chirp is heard then release the valet
switch. You are now in the Alarm feature
“C”
programming mode.
3 Press and release the transmitter button corresponding to the feature you want to program.
Press
Transmitter
Button
One Chirp / LED
one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps / LED
four pulses
1
H2/13 Pink Wire
=
Two step door
unlock output
H2/13
Pink Wire
= Factory
Security Disarm
Signal Output
H2/13
Pink Wire
= Start Status
Output
(Shock Sensor
Bypass)
H2/13
Pink Wire =
Start Status
Output
(Shock Sensor
Bypass 20 SEC)
2
Brown / White
Wire = (-)
200mA Horn
Output
Brown / White
Wire = Factory
Security Rearm
Signal Output
3
Fahrenheit
display for
Temperature
Celsius display
For temperature
4
Override
Without
Password Pin
Code
Override With
Password Pin
Code
5
+
Black/Green
Wire Channel 4
Output =
Pulsed output
Black/Green
Wire Channel 4
Output =
Latched output
Black/Green
Wire Channel 4
Output =
Latched output
and reset with
ignition “on”
Black/Green
Wire Channel 4
Output = Timer
programming (set
to any interval
between 1 second
and 2 minutes.)
6
+
Black / Red
Wire Channel 5
Output =
Pulse output
White/Red
Channel 5
Output =
Latched output
White/Red
Channel 5
Output =
Latched output
and reset with
ignition “on”
White/Red
Channel 5 Output
= Timer
programming (set
to any interval
between 1
second and 2
minutes.)
7
+
Black / Violet
Wire Channel 6
Output =
Pulse output
Black / Violet
Wire
Channel 6
Output =
Latched output
Black / Violet
Wire
Channel 6
Output =
Latched output
and reset with
ignition “on”
Black / Violet
Wire
Channel 6
Output = Timer
programming (set
to any interval
between 1 second
and 2 minutes.)
Exit:
Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
Channels 4 /5 /6 Timer Control Output Programming.
Enter:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
5 times (holding in on the 5th push
) until one long chirp is heard then release the valet
switch. You are now in the Alarm feature
‘C’
programming mode.
Timer Program:
1. Press and release
and
buttons together
4 times, [4] LED flash, [4] siren/horn chirps to indicate that you
are in features “Channel 4 Timer Programming mode”.