Encore Networks BANDIT III, Быстрый старт

Страница: 10 / 16

Page 10
BANDIT III Reference Module, Document 1
Go to
Table of
Contents
Go to
Top
Doc
Go to
List of
All Docs
1.1.9.1.2 The LAN Ethernet Port
Table 1-3 shows the interface options for the LAN port.
The LAN Port has the following IP features:
• Static routing
• Standard RIP V1, V2 routing
• Prioritization on Layers 2 and 3
• DiffServ marking and classification for end-to-end prioritization
• IP Quality of Service
• Dynamic bandwidth allocation
• 802.1q VLAN tagging
• VRRP (RFC 3768)
• Fragmentation and reassembly (MTU) LAN
• DHCP server, client, relay; Bootp
• SNMP, MIB II
• ARP; Proxy ARP
• Routing over VPN tunnels
1.1.9.2 Modem Port
An internal modem resides in the BANDIT III. Connect the modem port to an RJ11 telephone
jack.
1.1.9.3 Serial Port
The BANDIT III uses a DB25 serial port.
Table 1-4 lists the BANDIT III’s DB25 serial port interface options. Table 1-5 lists the BANDIT
III’s DB25 serial port protocol options. For the BANDIT III’s DB25 serial port pin
configuration, see
Table A-5 . Use the BANDIT III software to set the DB25 serial port as DCE
or DTE.
Table 1-3. LAN Port Interface Options
Standard
• BANDIT III: 10/100-Base-T, with an RJ45 connector
Table 1-4. BANDIT III DB25 Serial Port Interface Options
Standard
• Serial:
- RS-232 (256 kbps sync, 230 kbps async)
Top Doc
Doc List
Module TOC