Encore Networks BANDIT III, Быстрый старт

Страница: 11 / 16

BANDIT III Hardware Description
Page 11
Go to
Table of
Contents
Go to
Top
Doc
Go to
List of
All Docs
1.1.9.4 Wireless Ports
The BANDIT III has one internal wireless port, and you can put a second wireless card into
the BANDIT III’s expansion slot. (Although that second card will be in the external
expansion slot, its wireless port is internal.)
The BANDIT III can use CDMA, EVDO, GSM HSPA, GSM GPRS, or GSM EDGE wireless
cards, in any combination of two cards. For more information, see
Wireless Cards for BANDIT
Products .
1.1.10 Expansion Ports
For information on the expansion ports available in the BANDIT III, see Ports in the BANDIT
Products . If the expansion port is for a wireless connection, also see Wireless Cards for BANDIT
Products .
1.2 Status LEDs
Light-emitting diodes (LEDs) on the front of the BANDIT III indicate the status of
connections. The following sections describe the LEDs. See the following:
• General Status LEDs
• Protocol Status LEDs
Table 1-5. Serial Port Protocols
Protocol
Features Supported
Frame Relay
• Link Management
- LMI, CCITT, Q.933 Annex A;
- ANSI T1.617 Annex D
• IP over Frame Relay
• CIR Enforcement
• Fragmentation FRF12
• Fast Connection
• Prioritization
• Unicasting
• Multicasting
PPP, Multilink PPP • Sync PPP
• Async PPP
• PAP
• CHAP
• IP over PPP
IP
• All standard IP features
X.25 • All standard X.25 features
Top Doc
Doc List
Module TOC