EMUGE Speedsynchro Mini, Руководство по эксплуатации

Страница: 8 / 28

Speedsynchro
®
Mini
8 Operating instruction edition: 13.09.2022
If necessary, turn the
shank until the stop fixture
engages
Alignment of the two
grooves
Picture 2
2 Putting the Speedsynchro
®
Mini into operation
2.1 Unpacking

Take the Speedsynchro
®
Mini from the packing

Clean the Speedsynchro
®
Mini with a duster to remove any conservation oil
Note
Do not use any aggressive solvents.
Do not use fibrous materials i.e. steel wool
2.2 First putting into operation / preparation
Note
The angel position of the Speedsynchro
®
Mini stop fixture is not adjustable.
The position of the machine-side locking block at the spindle is adjusted to the stop
fixture of the Speedsynchro
®
Mini during initial assembly.

Hook the Speedsynchro
®
Mini manually into the designated magazine tool
slot. Make sure that the stop fixture is engaged in the angular position, please
see Picture 2. Green marking ring is visible, please see
Picture 3
,
page 9.
Attention
The housing of the Speedsynchro
®
Mini must be secured against twisting via stop fixture
.
For the use of the Speedsynchro
®
Mini the machine-side locking block must be mounted.