EMUGE Speedsynchro Mini, Руководство по эксплуатации

Страница: 10 / 28

Speedsynchro
®
Mini
10 Operating instruction edition: 13.09.2022
Mounting of the machine-side locking block on the spindle block

Mount the machine-side locking block hand-tight with two hexagon socket
screws.
The mounting threads on the spindle head are located on the side facing away
from the machine door, M6, M8, M10, or M12, depending on the machine.
Reducing sleeves are available as accessories for M6 and M8, please order
these separately.
Picture 5

Insert the Speedsynchro
®
Mini into the spindle at the lowest speed of the tool
changer.

Check the correct position of the fixing bolt

green marking ring is not
visible, please see
Picture 4
,
page 9.

Tighten the mounting screws on the machine-side locking block.
Table 2: Tightening torques of the mounting screws
Dimension
Recommended tightening
torque
M 6 10,5 Nm
M 8 25 Nm
M10 47 Nm
M12 78 Nm
Hexagon socket screws
Machine-side locking block