Speedsynchro
®
Mini
22
Operating instruction edition: 13.09.2022
5 Storage when not in use
If the Speedsynchro
Mini is taken out of service, please go through the following
steps:
-
Clean the Speedsynchro
Mini with a duster, please refer to chapter 4.2, page 21.
-
Spray or rub in the Speedsynchro
Mini with a conservation oil, to avoid rust
formation
Attention
Before storage all coolant lubricant residues and machining residues must be
removed!
6 Disposal instructions
This instrument contains a non- rechargeable Lithium battery! If the battery is empty,
it must not be disposed of in household waste!
Spent batteries may contain toxic waste which can cause harm to environment and
damage to health. To replace or remove the battery, please contact your EMUGE
partner.
For safety reasons, do not attempt to remove the battery. Failure to properly remove
the battery may result in damage to the device.
All batteries can be recycled. Raw materials such as iron, zinc or nickel can be
recovered from recycled batteries. Thus battery recycling helps protecting the
environment.
Used electrical devices put on the market by EMUGE can be returned to us. We will
ensure an environmentally safe disposal. The current EU directives "RoHS" and
"WEEE" and the "ElektroG" are observed.
