EMU procussion, Руководство по эксплуатации

Страница: 41 / 125

35 Procussion operation manual
PROGRAMMING BASICS
General Information
Your initial involvement with the Procussion will most likely consist of
using the existing kits and selecting MIDI channels. While the factory kits
are very good, there are probably some things you would like to change,
perhaps the tuning, or the tone of a stack. You may also want to make your
own custom kits using complex modulation routings. Entirely new
sounds can be created by combining the attack portion of one sound with
the body of another sound or by combining the digital waveforms with
sampled sounds. There are 64 user locations (64-127) available to store
your own creations or edited factory kits. Best of all, it’s easy to edit or
create new kits using the edit menu.
Creating your own custom kit is easy. First, you select the key range for
a zone. Then you can simply select the desired stack from the palette of
pre-programmed factory stacks. Repeat these two steps until you have a
large enough drum kit. You may assign up to 24 stacks to a kit and a zone
may contain up to 4 instruments. MIDI drum pads may be programmed
to trigger successive note numbers within a given zone for easy tuned
percussion.
PROGRAMMING BASICS
Drum
Stack
Up to 4 Instruments
which can be
controlled or switched
in various ways.
Up to 24 Zones
Zone
1
Zone
2
Zone
24
MIDI Drums
36 48 60 72 84 96
MIDI
Note # -
Drum
Stack
Up to 4 Instruments
which can be
controlled or switched
in various ways.
Drum
Stack
Up to 4 Instruments
which can be
controlled or switched
in various ways.
Zones larger than
1 note are used for
Tuned Percussion
PROCUSSION KIT
Zone 2
Zone 24
Zone 1