EMU procussion, Руководство по эксплуатации

Страница: 27 / 125

27
Procussion operation manual
MIDI MODE CHANGE
This function selects whether or not MIDI mode change commands
(omni, poly, etc.) are accepted or ignored when received over MIDI (see
MIDI Mode).
MIDI MODE CHANGE
Disabled
MIDI CONTROLLER ASSIGN
The Procussion allows you to assign up to six realtime control sources
from your MIDI controller. These control sources could be foot pedals,
data sliders or whatever. In this screen, you set up which controllers will
be received by Procussion. What effect the controller will have is pro-
grammed separately for each Kit. Volume and Pan each have their own
controller. Four other MIDI controllers are assigned a letter A-D. Each of
the controllers can be assigned to a MIDI realtime controller number from
01-31. The MIDI controller number will be automatically sensed by
simply moving the controller (pedal, wheel, etc.) when the cursor is
underneath the value. This way you don't have to remember the control-
ler numbers. For more information, see MIDI Realtime Controls in the
Programming Basics section.
CONTROLLER#
VOL:07 PAN:10
Next Screen:
CONTROLLER# ABCD
01 02 03 04
MIDI Program Change
MASTER MENU
Some of the standard
MIDI Controller num-
bers are listed below.
1 - Modulation Wheel or
Lever
2 - Breath Controller
3 - Pressure: Rev 1 DX7
4 - Foot Pedal
5 - Portamento Time
6 - Data Entry
7 - Volume
8 - Balance
9 - Undefined
10 - Pan