“This document is intended as a guide only. Whilst the information it contains is believed to be correct, Emtelle can take no responsibility for actions taken based on the information contained in this document. Emtelle reserves the
right to make changes to this document without notice. All sales of product are subject to Emtelle’s terms and conditions of sale only, which can be found on Emtelle’s website.”
95
I N N O V A T I O N A N D F L E X I B I L I T Y
T H E
I N S T A L L A T I O N A N D M A I N T E N A N C E T R A I N I N G M A N U A L
9 Fibre blowing
9.12.3 Flow meter Kit (7778)
The flow meter kit contains the flow meter, air stones and air hose connectors.
Reading the Flow meter
The reading from the fl ow meter is taken from the top of the weight as shown below.
Tube Connection to Air hose
This is needed when either testing a system or blowing out a fi bre unit.
1. Push air hose connector A into
the hose.
2. Attach the primary m/d to the
8mm-5mm reducer.
3. Push the two together.
Correct reading (25 litres per minute)
