Empire Comfort Systems DVP42FP30N-4, Инструкция по установке и руководство пользователя, Страница: 35 / 80

31455-10-1115 Page 35
DVVK-4RE VENT KIT INSTALLATION INSTRUCTIONS
Figure 60
Figure 61
5HPRYHRXWVLGHPRXQWLQJSODWHZLWKWXEHDWWDFKHGIURPZDOO
Mark and cut the extra length of the 6 5/8” (168mm) diameter
tube from the opposite end. Do not crimp or enlarge tube.
$WWDFKWKH´PPGLDPHWHUÀXHRXWOHWWXEHRQWRWKHULJLG
YHQWLQJV\VWHPRUGLUHFWO\WR¿UHSODFH(QVXUHWKH´PP
GLDPHWHUÀXHRXWOHWWXEHLVSODFHGDVIDUDVSRVVLEOHRQWRWKH
ULJLGYHQWLQJV\VWHP0DUNWKH´PPGLDPHWHUÀXHRXWOHW
WXEH´PPEH\RQGWKHYLQ\OVLGLQJNLWRUZDOO6
ee
Figure 61.
5HPRYHWKH´PPGLDPHWHUÀXHRXWOHWWXEH
IURPULJLGYHQWLQJV\VWHP:KHQLQVWDOOLQJGLUHFWO\WR¿UHSODFH
tape gasket needs to be used.
0DUNRUZUDSWDSHFRPSOHWHO\DURXQGWKHWXEHVDWWKHPDUNHG
points to help in making a true cut. Do not crimp or enlarge
tubes.
10. From outside: Push the 6 5/8” (168mm) diameter inlet tube/
mounting plate onto end of rigid venting system to correct
position. Fasten the outside mounting plate to the vinyl siding
NLWRUZDOOZLWKIRXU[´VFUHZV(QVXUHXSZDUGVORSH
11. From inside: Attach the inlet tube to the collar on the back of the
¿UHSODFHRUWKHULJLGYHQWLQJV\VWHPXVLQJWKUHHVHOIWDSSLQJ
VFUHZV
6HDOWKH´PPGLDPHWHUÀXHRXWOHWWXEH)ROORZLQVWUXF -
tions and diagram. See Figure 62.
)DVWHQ´PPGLDPHWHUÀXHRXWOHWWXEHLQSODFH'RQRW
³WZLVW´WKHÀXHRXWOHWWXEHLQWRWKH¿UHSODFHFROODURUULJLGYHQW
-
ing system). Hold the tube by the seam and push in using a
perpendicular “rocking” motion. This ensures the seam on the
tube stay intact.
)DVWHQYHQWFDSHQGXVLQJWKUHH[´VFUHZVWRPRXQWLQJ
plate.
Sealing 4” (102mm) Diameter Flue Outlet Tube
Figure 62
NOTICE:
7DSHJDVNHWWREHDSSOLHGSULRUWRLQVWDOOLQJWR¿UHSODFH
ÀXHRXWOHWWXEHRQO\7DSHJDVNHWVKRXOGQRWEHXVHGZKHQPDWLQJ
WKHÀXHRXWOHWWXEHWRDULJLGYHQWLQJV\VWHP