manualshive.com logo in svg

Empire Comfort Systems DVP36FP30N-5, Инструкция по установке и руководство пользователя, Страница: 58 / 80

Поделиться
Скачать
Empire Comfort Systems DVP36FP30N-5 Скачать руководство пользователя страница 58

39358-3-1019

Page 58

ReMote CoNtRoL oPeRAtIoN INStRUCtIoNS

SMARt tHeRMoStAt oPeRAtIoN

The Smart Thermostat function adjusts the flame height in accor-

dance with the difference between the set point temperature and 

the actual room temperatures.
As the room temperature gets closer to the set point the Smart 

Function will modulate the flame down.
To activate this function, press the THERMOSTAT key until the 

word “SMART” appears to the right of the temperature bulb 

graphic.
To adjust the set temperature, press the UP or DOWN ARROW 

keys until the desired set temperature is displayed on the LCD 

screen of the Transmitter. 

NotICE: 

When Smart Thermostat is activated, the manual flame 

height adjustment is disabled.

Figure 81 - SMARt Function Icon

Figure 82

FAN SPeeD CoNtRoL

The speed of the fan can be controlled by the Proflame system.

The fan speed can be adjusted through six speeds.

To activate this function, use the MODE key 

Figure 72a

 to index 

to the fan control icon.

 See Figure 83.

Use the UP/DOWN ARROW keys to turn on, off or adjust fan 

speed. 

See Figures 72a and 84. 

A single “beep” will confirm reception of the command.

Figure 83 - Fan Icon

Figure 84 - Fan Speed Control Activated

Содержание DVP36FP30N-5

















































































Отзывы:

Нет отзывов