manualshive.com logo in svg

Empire Comfort Systems DVP36FP30N-5, Инструкция по установке и руководство пользователя, Страница: 57 / 80

Поделиться
Скачать
Empire Comfort Systems DVP36FP30N-5 Скачать руководство пользователя страница 57

39358-3-1019

Page 57

ReMote CoNtRoL oPeRAtIoN INStRUCtIoNS

ReMote FLAMe CoNtRoL

The Proflame has six flame levels.
With the system ON and the flame level at the maximum in the 

appliance, pressing the DOWN ARROW key once will reduce the 

flame height by one step until the flame is turned OFF.
The UP ARROW key will increase the flame height each time it is 

pressed. 
If the UP ARROW key is pressed while the system is ON but the 

flame is OFF, the flame will come ON in the high position. 

 

Figure 76 - Flame oFF

Figure 77 - Flame Level 1

Figure 78 - Flame Level 5

Figure 79 - Flame Level Maximum

tHeRMoStAt tRANSMItteR oPeRAtIoN 

The Remote Control can operate as a room thermostat. The ther-

mostat can be set to a desired temperature to control the comfort 

level in a room.
To activate the function, press the THERMOSTAT key. 

See Fig-

ure 72a. 

The LCD display on the Transmitter will change to show 

that the room thermostat is “ON” and the set temperature is now 

displayed. 

See Figure 80.

To adjust the set temperature, press the UP or DOWN ARROW 

keys until the desired set temperature is displayed on the LCD 

screen of the Transmitter.

Figure 80

Содержание DVP36FP30N-5

















































































Отзывы:

Нет отзывов