background image

Environment of Unit 

 

Cleaning Safety

 

 

Condition of Unit

 

Do not use steam cleaners or high-
pressure cleaners to clean the cooktop, 
as this may result in electric shock.

                              Do not operate any 
appliance with a damaged cord or 
after the appliance malfunctions or 
has been damaged in any manner. 
Return appliance to the nearest  
authorized service facility for 
examination, repair, or adjustment.

To

 

reduce

 

the risk of fire, do not let any

 

objects(glass, paper, etc.)

 

obstruct

 

the

 

inlet and outlet of

 

your

 

cooktop.

  

To

 

reduce

 

the risk of electric shock,

 

do 

not

 

mount unit over a

 

sink.

 

To

 

reduce

 

the risk of fire, do not store

 

anything directly on

 

top of the 

appliance surface when the appliance

 

is

 

in

 

operation.

 

Always

 

have

 

a

 

working

 

smoke

 

detector

 

in

 

or

 

near the kitchen.

                            Do not leave

 

lids

 

or

 

other

 

metal

 

objects

 

such

 

as

 

knives,

 

forks or spoons

 

on

 

the

 

cooktop

If the 

cooktop is turned on, these

 

objects can

 

heat

 

up quickly

 

and may cause burns.

  

Do not place

 

rough

 

or

 

uneven objects 

on the units as they may damage the 
surface.

 

If

 

the

 

cooktop

 

is

 

near

 

a

 

window,

 

ensure that curtains do

 

not

 

blow over

 

or

 

near

 

the unit.

                                   Do not use

 

the

 

cooktop

 

as

 

a

 

work

 

surface.

 

Certain 

substances

 

such

 

as

 

salt,

 

sugar,

 

or

 

sand 

can scratch the glass ceramic surface.

  

Do not store hard or pointed

 

objects

 

over

 

the

 

cooktop as they can

 

damage

 

the

 

unit

 

if they fall

 

on

 

top.

  

 

Important

 

Safety

 

Instructions

CAUTION

IMPORTANT

WARNING

WARNING

IMPORTANT

IMPORTANT

                                   

Do Not Cook on 

Broken Cooktop.

 

If cooktop break, 

cleaning solutions and spillovers may 
penetrate the broken cooktop and 
create a risk of electric shock.

2

Содержание EMPV-IDCF9

























Отзывы: