Using the Boost
Using The Cooktop
By holding down either of these buttons,
the value will adjust up or down.
11
To start cooking
After power on, the buzzer beeps once,
all the indicators light up for 1 second
then go out, indicating that the induction
has entered the state of standby
mode.
cooktop
Touch the ON/OFF control, the
buzzer beeps once indicating that the
induction cooktop has entered the state
of standby mode, the Power indicator
light up.
Place a suitable pan on the cooking
zone that you wish to use.
Make sure the bottom of the pan and the
surface
Touching the heating zone selection
control that you wish to switch off.
Turn the cooking zone off by touching
the “-” or sliding the setting selector and
scrolling down to “0”.
Turn the whole cooktop off by touching
the “ON/OFF” control.
Touching the heating zone selection
control, and a indicator next to the key
will flash
Select a heat setting by touching the
“-” or “ ” control or sliding the setting
selector with your finger.
+
If you don't choose a heat setting within
30 seconds, the induction hob will
automatically switch off. You will need to
start again at step 1.
You can modify the heat setting at any time
during cooking.
Boost is the function that one zone
rising to a larger power in one second
and lasting for 10 minutes. Thus you
can get a more powerful and faster
cooking.
When you have finished cooking
