background image

4

IMPORTANT PRECAUTIONS AND  

RECOMMENDATIONS

After having unpacked the appliance, check to ensure that it is 

not damaged.

In case of doubt, do not use it and consult your supplier or a 

professionally qualified technician.
Packing elements (i.e. plastic bags, polystyrene foam, nails, 

packing straps, etc.) should not be left around within easy reach 

of children, as these may cause serious injuries.
The packaging material is recyclable and is marked with the 

recycling symbol 

• 

Do not attempt to modify the technical characteristics of the 

appliance as this may become dangerous to use.

• 

Do not carry out cleaning or maintenance operations on the 

appliance without having previously disconnected it from the 

electric power supply.

• 

After use, ensure that the knobs are in 

OFF

 position.

• 

Do not allow children or other incapable people to use the 

appliance without supervision.

• 

During and after use of the oven, certain parts will become 

very hot. Do not touch hot parts.

• 

Keep children away from the oven when it is in use.

• 

Stainless steel models only: 

This oven is supplied with a 

protective film on steel and aluminium parts. This film must 

be removed before installing/using the appliance.

•  Fire risk!

 Do not store flammable material in the oven.

• 

Make sure that electrical cables connecting other appliances 

in the proximity of the oven cannot become entrapped in the 

oven door.

• 

Do not line the oven walls with aluminium foil. Do not place 

shelves, broiler pan, pans or other cooking utensils on the 

base of the oven chamber.

• 

The manufacturer declines all liability for injury to persons or 

damage to property caused by incorrect or improper use of 

the appliance.

• 

To avoid any possible hazard, the appliance must be installed 

by qualified personnel only. Any repairs by unqualified 

persons may result in electric shock or short circuit. In order 

to avoid possible injuries to your body or to the appliance, 

do not attempt any repairs by yourself. Such work should be 

carried out by qualified service personnel only. 

•  Important!

 The use of suitable protective clothing/gloves is 

recommended when handling, installing or cleaning of this 

appliance.

•  Danger of burns!

 The oven and cooking accessories may 

become very hot during operation. Make sure children are 

kept out of reach and warn them accordingly. To avoid burns 

use kitchen clothes and gloves when handling hot parts or 

utensils.

• 

Stand away from the oven when opening oven door. Hot air 

or steam which escapes can cause burns to hands, face, 

and/or eyes.

• 

Never clean the oven with a high-pressure steam cleaning 

device, as it may provoke a short circuit. 

 KEEP ATTENTION!!

STAND AWAY FROM THE CONTROL 

PANEL LOUVERS (see figure above). 

HOT AIR WHICH ESCAPES CAN CAUSE 

BURNS TO HANDS, FACE, END/OR EYES.

USER INSTRUCTIONS

Содержание EMPV-24WO08























Отзывы: