background image

2

•  Do not store or use gasoline or other flammable vapors and liquids in 

the vicinity of this or any other appliance.

•  WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.  

• Do not touch any electrical switch; do not use any phone in your 

building.

• Immediately call your gas supplier from a neighbor’s phone.

  Follow the gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

•  Installation and service must be performed by a qualified installer, 

service agency, or the gas supplier.

WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT 

FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT 

CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

This appliance is designed and manufactured solely for the cooking of 

domestic (household) food and is not suitable for any none domestic 

application and therefore should not be used in a commercial environment.
The appliance guarantee will be void if the appliance is used within a none 

domestic environment i.e. a semi commercial, commercial or communal 

environment.

WARNING

NEVER use this appliance as a space heater to heat or warm the 

room. Doing so may result in carbon monoxide poisoning and 

overheating of the oven.

  WARNING!

The Governor of California is required to publish a list of substances known to the state of California to cause 

cancer or reproductive harm and requires businesses to warn customers of potential exposures to such 

substances.

WARNING!

: Gas appliances contain or produce substances which can cause death or serious illness and 

which are known to the State of California to cause cancer, birth defects or other reproductive harm. 
To reduce the risk from substances in fuel or from fuel combustion, make sure this appliance is installed, 

operated, and maintained according to the manufacturer’s instructions.

Содержание EMPV-24WO08























Отзывы: