13
Fig. 4.1
OVEN DOOR
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven
door glass since they can scratch the surface, which may result in shattering of
the glass.
Do not store flammable material in the oven.
REPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the appliance, it must be
disconnected from the power supply.
– Let the oven cavity and the broil burner cool down;
– Switch off the electrical supply;
–
Remove the glass cover of the lamp-holder(Fig.4.1);
;
– URemove the lamp and replace with a lamp resistant to high temperature 575
℉
– Refit glass cover of the lamp-holder
NOTE
: Oven bulb replacement is not covered by your guarantee
REMOVING THE OVEN DOOR
To facilitate oven cleaning, it is possible to remove the door.
Please follow the instructions carefully:
– Open the door completely(fig. 4.2).
–
Lift up and turn the small levers situated on the two hinges,grip the door on the two
external sides, shut it slowly but not completely (fig. 4.3).
–
Pull the door towards you, pulling it out of its seat
– Rest the door on a soft surface.
DOOR ASSEMBLY
–
Reassemble the door by following the above procedures backwards.
4
with the following characteristics:120V 60 Hz, 15W, E14.
Fig. 4.2
Fig. 4.3
Fig. 4.4
