The power cable for the Fusion 8100 should be unplugged from the outlet during severe electrical storms, or
when unused for a long period of time.
Only replace the fuse(s) in the Fusion 8100 with a fuse(s) of proper value and voltage rating.
The Fusion 8100 should only be cleaned as directed in the manual. Avoid spraying liquids directly onto the
Fusion 8100 and NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into
the inside of the Fusion 8100.
You should seek service for your Fusion 8100 by qualified service personnel if any of the following occur:
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents.
3. The Fusion 8100 has been exposed to rain.
4. The Fusion 8100 exhibits a marked change in performance.
5. The Fusion 8100 has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE FUSION 8100 FROM THE AC POWER MAINS, DISCONNECT THE
AC POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE FUSION 8100 AC POWER CORD MUST REMAIN READILY ACCESSIBLE AT ALL TIMES.
!
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Antenna lead-in wire
Grounding conductors
(NEC section 810-20)
Antenna discharge unit
(NEC section 810-20)
Power service grounding
electrode system
(NEC art 250, part H)
Ground clamps
Ground clamp
Electric service
equipment
NEC - National Electrical Code
Содержание Fusion 8100
