Emotiva Fusion 8100, Руководство пользователя

Страница: 24 / 64

Page 18
Fusion 8100: User Manual
12. On Button
Press this button to turn the Fusion 8100 On when it is in Standby.
13. Menu Button
Accesses the front panel menu system and the full-color on-screen display (OSD).
14. Dim Button
Press this button to dim the front panel VFD (vacuum fluorescent display) on the Fusion 8100.
The display will get gradually brighter each time you press the button, then, when it reaches the
brightest setting, drop back to the dimmest setting (dim but not fully off).
16. Mute Button
Press this button to mute the audio output of the Fusion 8100; press it again to return to the
previous Volume level.
17. Volume Buttons
Press these buttons to turn the volume up or down on the Fusion 8100. The current volume
setting is displayed on the front panel display.
18. Zone 2 and Zone 3 Buttons
These buttons are used to control the audio being sent to the Zone 2 and Zone 3 outputs. When
you press the Zone 2 or Zone 3 button, the remote control will temporarily control that zone.
The display will switch to indicate that you are now controlling the selected zone; you may then
press the On or Standby buttons to turn the power for that zone On or Off (this includes the
output signal for that zone, and the trigger, if you have assigned one to that zone); you may use
the Input + and Input - to step between inputs for that zone; and you may use the Vol + and Vol
- buttons to control the audio level for that zone. The remote control will return to normal mode
(no longer controlling the selected zone) a few seconds after you finish entering changes.
Note: The Volume and Input Selector Buttons will only accept changes while the zone you are
addressing is turned On. (When each zone is Off, the only command that it will recognize is On.)