Emotiva Fusion 8100, Руководство пользователя

Страница: 31 / 64

Page 25
Fusion 8100: User Manual
Zone Menu
The Zone Menu is used to configure the additional audio zones (Zone 2 and Zone 3).
For each zone, the zone may be enabled (On) or disabled (Off), the default Volume level may be
set, and the default program source may be selected.
Either extra zone may be configured to play either the source currently selected in the main zone
or a different source, but not all choices are valid for both zones.
If either Zone 2 or Zone 3 is configured to Sync to Main, then that zone will play whatever source
is selected in the main zone regardless of the source format.
If Zone 2 is configured to play a different source, then the selected source must be either an
analog source, the tuner, a two-channel (PCM) digital source, or a Bluetooth source. Surround
sound digital sources are not valid in this context.
If Zone 3 is configured to play a different source, then the selected source must be an analog
source only.
Note: For the technically inclined; the Fusion 8100 has a second DAC, which can be used to
decode a second stereo digital audio source for output on Zone 2.
Note: There is a switch on the rear panel of the Fusion 8100 that allows you to route the Zone 2
audio to the amplifier channels normally used by the Fusion 8100 to deliver audio to the Rear
Surround Speakers. If this switch is IN, the SBL and SBR outputs are for Rear Surround Speakers.
If the switch is OUT, then the SBL and SBR outputs deliver Zone 2 audio.
This is a manual switch, and operates independently of the menu settings.
Input Mode Parameter Zone Setup
Zone 3 Volume
Zone 3 Power
Zone 2 Volume
Zone 3 Source
Zone 2 Source
Zone 2 Power
40
Off
40
Sync by Main
Sync by Main
Off
FM 87.50MHz
FM 87.50MHz