Emotiva Fusion 8100, Руководство пользователя

Страница: 56 / 64

Page 50
Fusion 8100: User Manual
Example Input Configuration
The following is an example of how you might choose to configure your Fusion 8100. In the
example, we will be configuring a typical 7.1 surround system, with seven speakers and a
powered sub, and a Blu-Ray player and Cable Box as the video and audio sources. The Cable Box is
connected to HDMI 1 input, and the Blu-Ray player is connected to the HDMI 2 input. Both input
devices, and our monitor, support HD.
Electrical Connections
• Connect the Cable Box to the HDMI 1 Input (using an HDMI cable).
• Connect the Blu-Ray Player to the HDMI 2 Input (using an HDMI cable).
• Connect the Monitor (TV) to the HDMI Output (using an HDMI cable).
• Connect the amplifier outputs on the Fusion 8100 to your seven surround-sound speakers.
• Ensure that the Back Channel switch on the rear of the Fusion 8100 is IN.
• Connect the subwoofer output to your powered subwoofer.
Since the Fusion 8100 will be doing the bass management for all of our speakers, we have
set the crossover on our powered subwoofer to “Flat”. We have initially set the level on our
subwoofer to “0 db”.
Menu Settings
Note: In this example, we will be leaving a lot of settings at their default values, and will not
be entering several menu screens at all. Obviously, this is an example, and your system may
require different settings.
The only configuration that will be required to start enjoying your Fusion 8100 at this point is to
run the Fusion Advanced Room Equalization System (refer to Page 38 for details).
(You may even skip this step if you don’t want to take the time right now, or are still finalizing your
room setup. If so, then simply select HDMI 1 for Cable or HDMI 2 for your Blu-Ray player.)