24
eMotimo spectrum Instructions R007
controller to continue. If using the
NavStick
, press center button once to advance to control
your 3rd and 4th axis for programming. Once satisfied, press center button on your
NavStick
a
second time to continue.
3.
End Point
This is where your move will end. Once highlighted, control and move all 4-axis at
the same time using the included PS4 controller or control 2-axis at a time using the onboard
NavStick
. Move to the point where you would like your move to end and press X on the PS4
controller to continue. If using the
NavStick
, press center button once to advance to control
your 3rd and 4th axis for programming. Once satisfied, press center button on your
NavStick
a
second time to continue.
Hint
– if you are in a hurry, you can set up the End Point first and then the Start Point – this eliminates
the time it takes for the rig to return to the start point. This is especially helpful if you are using a slow
motor or slider. We used to call this Reverse Setup with previous products, but now, no special mode
is needed.
4.
Interval (SMS TL only)
: Interval is your frame rate for time lapse or stop-frame animation. If
you select a 2.0 second interval, the eMotimo spectrum will trigger your camera to start a shot
every 2.0 seconds. If you want to speed time more, select a longer interval (good for shots
taken over a long duration of time). If you want to speed time less, select a smaller interval
(good for shots taken over a short duration of time). Interval time always needs to be set longer
than the exposure time set on your camera. TIP: When shooting long exposures, set your
interval to twice your camera’s shutter speed.
5.
Static Time (SMS TL only):
Static time is the amount of time the spectrum remains stationary
and triggering your camera’s shutter before it moves. For setting the correct static time, start
with you your camera’s exposure time and add 0.1 or 0.2 seconds onto it. For example, if
you are shooting a 2.0 second exposure, select a 2.2 second static time. If you are shooting
daytime shots with 1/100th sec. exposure, use default of 0.2 second static time.
6.
Moving shots (SMS TL only):
Select how many frames you want your move to take. Based
on what you set your interval at and how many frames you want in your shot, the spectrum will
calculate how long your shot will take to complete in real time at the bottom of the screen.
The
max number of frames for timelapse is 2880.
7.
Duration (Video only):
In seconds, select how long you would like your move to take. The
max duration for video moves is 12 hours.
Timelapse
Video
Содержание spectrum ST4
