eMotimo spectrum ST4, Инструкция по эксплуатации

Страница: 26 / 38

26
eMotimo spectrum Instructions R007
12. Set Complex Key-frames: By highlighting the key-frame number, all axis set as multi-key-
frame (previous page) are live. If an axis is set as start/end, then it will not be live on all frames
between the first and last frame. For example, on a 5 point move, it will not be live for frame
2,3, and 4.
13. Shot Style (Video only):
a. Run Once : In this style, your move will run once, meaning once your move completes, your
move is over.
b. Ping Pong: In this style, your move will run continuously, meaning once your move reaches
its end point it will return to its start point with the same ramp and duration and with continue
this cycle over and over until prompted to stop
14. Summary/ Review page : If you are happy with your settings, then get to the last screen and
hit the center button (or X on controller). It will go to start, and then tap it again to shoot.
Hint – Backlash compensation: When returning to start, spectrum will jog past the start point then
return back the start point from the other direction. This is for backlash compensation. We always
want our motors lined up on the same side of the motors backlash for every move.
While Shooting
, pressing X on the remote or the center button on the spectrum will pause the move.
While paused, using DPad’s up/down buttons you can scrub the move and go to a frame. As you
scrub, you will notice the spectrum moving with you live to the frame you’re on. The spectrum will
continue your move once you un-pause the shot by hitting the X button. You can also abort and return
to the home screen by pressing Square once the shot is paused.
After Shooting, a menu to repeat, reverse, or reset will pop up. Select the option you want.
Hint
– If you want to adjust timing or shot parameters, use the D-Pad to go back up into the setup
process to change a value. You can even go back and adjust the start and end points. Start the
shot back up by returning to the review screen.