eMotimo spectrum ST4, Инструкция по эксплуатации

Страница: 23 / 38

23
Copyright © 2018 eMotimo INC
Programmed moves are how most motion control gear works.
Programmed moves
You set up key-frames and parameters and then let the head define the trajectory between those key-
frames. Programmed shots are easy to set up and run
Did you know that . . .Back in 2010, the $510 eMotimo PT was the only key-frame programmable motion
control robot less than $10K? It enabled setting up shots in the field without a computer in just a couple of
minutes!
Setup is 2-point SMS or 2-Point Video or Multi-Key-framing Option:
Use the up and down D-Pad on the remote or the Spectrum NavStick to work your way through the 6
setup screens. Center button on the spectrum NavStick is the same as X on the remote.
You need to select (highlight) a value to change it. You do this by using the Center button on the
spectrum NavStick , or the X on the remote.
During the setup process, when choosing values, the DPad’s up/down buttons on the remote move
values the smallest amount. Using the DPad’s left right increments larger values. Or you can hold Up
and Down (both
NavStick
and remote) to accelerate through many values.
Parameters defined:
1. Type :
a. Timelapse : This is a 2-9-point shoot-move-shoot timelapse shot. If you are shooting
timelapse and want the spectrum to trigger your camera to shoot, select this shot type.
b. Video : This stands for a 2-9-point video shot. If you are shooting a continuous video
move, select this shot type.
2. Start Point : This is where your move will start. Once highlighted, control and move all 4-axis at
the same time using the included PS4 controller or control 2-axis at a time using the onboard
NavStick . Move to the point where you would like your move to start and press X on the PS4