WITH 100% ULTRASOUND
13
Onlineshop: emmi-dent.com
Switching on and off
Switching on:
Switch on the unit by pressing the pushbutton
(for approx. 1 second). Optionally, press the ON / OFF button
for about 9 seconds to switch off the position change beep (at
selected products also the vibrating motor). The green opera-
ting LED light is ON. The green LED of the power indicator lights
up. The user notes also soft vibration as an additional function
indicator.
Switch off/Automatic switch off:
Switch off the unit by pres-
sing the push-button (for approx. 1 second). The unit switches
off automatically after 6 minutes (Battery Save Function). The
device is also provided with an electronic sensor. If a wrong or
defective Ultrasound brush head is used, or no brush head has
been inserted, the unit will also switch off automatically and the
green LED goes off. Don‘t insert the brush head during trans-
port, the device can not be accidentally switched on (Travel Safe
Function).
LED Display
1 .
ON:
By pressing the ON/OFF button for
approx. 1 second (switch-on protection)
you switch on the device on. The green
LED lights up (power indicator).
2.
LED green - FUNCTION:
The green LED indicates that
the ultrasonic toothbrush works properly.
3.
LED blue - CHARGE:
When the handpiece is on the charging
station and is properly supplied 100-240V
mains voltage. If the device is fully charged,
the LED turns off (charge level check).
4.
LED red - CHECK/ DISRUPTION:
If the battery is empty or there is a fault, the red LED lights up.
The unit switches itself off, the red LED flashes for 5 seconds
and then turns off.
1 emmi®- dent Metallic hand piece,
1 ultrasound attachment for adults,
1 charging station,
1 tube ultrasonic toothpaste (75ml)
