35
=
=
i
Counting direction : P --> 0 (Downcounting)
=
When count value reaches the 0 Value, Output Position is changed. If
Output Pulse time is not 0, then Output Position is changed
at the end of the Pulse time and Real counting value is
shown
on Actual
value screen. If output pulse time , then output
position has not change
until
Manual Reset happens.
When counting value reach 0 value, output position becomes active
position and if the Start input is active, then count value starts counting
from Set value. But 0 value is observed in actual value display. Counting
process has not continue under 0 value.
When Manual Reset happens count value becomes SET value.
=
0
Set
Reset
Output
0
Set
Output
Start
Reset
Start
If output functions parameter is selected Automatic Reset (
, or , then must be different from zero
for realizing Automatic Reset.
