31
=
=
=
=
i
Automatic Reset-1
Counting direction : 0 --> P (Upcounting)
=
When count value reaches the Set Value, Output Position is changed.
Actual value is reset automatically. While Start input is active, then
counting starts upcounting from 0 value. If Output Pulse time
is not 0, then Output Position is changed at the end of the Pulse time.
If , then Output Position has not changed
until
Manuel Reset happens.
When Manual Reset happens, count value becomes 0 value.
=
When count value reaches the 0 Value, Output Position is changed.
Actual value is reset automatically. If Start input is active, then counting
starts downcounting at Set value. If Output Pulse time is not
0, then Output Position is changed at the end of the Pulse time. If Pulse
time then Output Position has not changed
until
Manuel Reset happens.
When Manual Reset happens count value becomes SET value.
=
Counting direction : P --> 0 (Downcounting)
=
0
Set
Reset
Output
Output
Start
0
Set
Reset
Output
Output
Start
If output functions parameter is selected Automatic Reset (
, or , then must be different from zero
for realizing Automatic Reset.
