13
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF530
5. Ceiling Fan Assembly
(continued)
50-WATT (MAXIMUM)
HALOGEN
MINI-CANDELABRA
BASE BULB (1)
LIGHT
FIXTURE
SOCKET
Figure 18
5.8
Screw the 50-watt (maximum) halogen mini candelabra
base bulb in the light kit fixture socket (Figure 18).
NOTE: Do not touch halogen mini candelabra base
bulb with bare hands. Fingerprints may result in
shorter bulb life. Remove fingerprints with rubbing
alcohol.
LIGHT KIT
ASSEMBLY
RAISED
DIMPLES (3)
GLASS SHADE
FLAT AREA (3)
GLASS
SHADE
Figure 19
5.9
Place the glass shade into the opening in the light kit
assembly, aligning the three flat areas on the top edge
of the glass with the three raised dimples on the light kit
assembly and turn the glass shade clockwise until it
stops (Figure 19).
NOTE: Periodically check that the glass shade is
seated fully clockwise in the light kit assembly.
Please call Emerson technical support at
1-800-654-3545 if you have any questions about
installation and operation of this ceiling fan.
To avoid risk of burns or other injuries, turn power off
and allow lamp to fully cool before attempting to
replace the halogen mini candelabra base bulb.
WARNING
!
BP7484 Wyatt CF530 12/18/13 11:52 AM Page 13
