7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF530
SUPPLY GREEN
GROUNDING WIRE
CEILING MOUNTING
PLATE GREEN
GROUNDING WIRE
FAN MOTOR MOUNTING
BRACKET GREEN
GROUNDING WIRE
Figure 5
4. How to Wire Your Ceiling Fan
4.1
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
CAUTION: To reduce the risk of electrical shock,
disconnect the electrical supply circuit before
installing the fan, light kit or wall control.
NOTE: Make all wiring connections using wire
connectors (supplied). Make sure that all
connections are tight, including ground, and that
no bare wire is visible at the wire connectors,
except for the ground wire.
4.2
Securely connect the green grounding wire from the fan
motor mounting bracket, the green grounding wire from
the ceiling mounting plate and the green grounding wire
from the supply conductor (this may be a bare wire or a
wire with green insulation) (Figure 5).
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and
the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
WARNING
!
SUPPLY WHITE
(NEUTRAL) WIRE
FAN MOTOR
WHITE WIRE
Figure 6
4.3
Securely connect the supply white (neutral) wire to the
fan white wire (Figure 6).
BP7484 Wyatt CF530 12/18/13 11:52 AM Page 7
