11
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF530
5. Ceiling Fan Assembly
(continued)
1/4-20 x 1/4" ROUND
HEAD SCREWS WITH
LOCKWASHERS (5)
FLYWHEEL
Figure 13
5.3
Place the flywheel onto the fan motor.
Align the five screw holes of the flywheel on the fan
motor.
Secure the flywheel to the fan motor using the five
1/4-20 x 1/4” round head screws with lockwashers
(provided) (Figure 13).
#6-32 x 1/4" TRUSS
HEAD SCREW WITH
LOCKWASHER (3)
LIGHT KIT
ADAPTER
Figure 15
5.5
Remove one #6-32 x 1/4” truss head screw with
lockwasher (retain for future use). Loosen the two other
#6-32 x 1/4” truss head screws with lockwashers for
installation of light kit housing adapter (Figure 15).
Slide the fan motor wiring and connector through the
center hole of the light kit housing adapter.
Position the light kit housing adapter onto the fan motor.
Rotate the light kit housing adapter to engage the two
keyhole slots.
Reinstall the previously removed #6-32 x 1/4” truss
head screw with lockwasher into the remaining hole of
the light kit housing adapter. Tighten the three screws
and lockwashers to secure the light kit housing adapter
to the fan motor (Figure 15).
FAN BLADE (4)
FLYWHEEL
SLOT(4)
#8-32 x 11mm TRUSS
HEAD BLADE SCREW
(3 PER BLADE)
Figure 14
5.4
Carefully place the fan blade (“THIS SIDE UP” label
should face the mating surface of the flywheel) into the
slot of the flywheel (Figure 14).
Securely install the three #8-32 x 11mm truss head
blade screws per blade to fan motor (Figure 14).
Complete the remaining three blades installation per the
above instructions.
NOTE: Take care not to scratch flywheel when
installing blades
BP7484 Wyatt CF530 12/18/13 11:52 AM Page 11
