12
Automatic Daylight Saving Calculation
The Real Time Clock will adjust automatically for daylight sav-
ings time, in the following manner:
Increment one hour at 2 AM on the second Sunday of March
and decrement one hour at 2 AM on the first Sunday of No-
vember. (New DST effective 2007).
The daylight saving feature can be enabled or disabled in
installer configuration menu. Default is
DS ON
(enabled).
After entering installer configuration mode, momentarily
press MENU button until the display indicates dS (in actual
temperature digits) and on (default – in clock digits).
or
buttons will toggle display and operation from on to OFF.
Programming Tip: Copy Program
When programming your thermostat, you may copy the pro-
gram from one day to another day or group of days using the
Copy
key. In 7 day programming mode, a day can be copied
to another day or all six other days. In 5/1/1 day programming
mode the weekday (Mon – Fri) program can be copied into
Sat and Sun or either Sat or Sun.
To copy a program from one day to another:
1) In Set Schedule mode, enter the program for the day or
select the day you wish to copy by pressing
Advance Day
.
2) Press
Copy
. On the display,
"Copy"
will begin to flash.
The day of the week being copied will show.
3) Press
Advance Day
. The day being copied will be indi-
cated and the other days will be flashing.
4) If you wish to copy to all days skip to next step or press
Advance Day
until the day you wish to copy to is flashing.
5) Press
Copy
.
“Copy”
will be on, the day you copied from
will disappear and the day(s) you copied to will be on.
6) If you wish to copy this same program into other days,
press
Copy
and repeat steps 2 through 5.
7) Press
RunSched
to return to normal operation.
Fill in the blank schedule on the next page then:
Enter the Heating Program
1) Press SYSTEM button to select
Heat
in the system switch
area indicating the active mode being programmed.
2) Press the Menu button and then press Schedule.
3) The top of the display will show the day(s) being pro-
grammed. The first period to be programmed will appear.
The set temperature will also be displayed and the time
will be flashing to indicate that the time can be changed.
4) Press
or
buttons to adjust the start time for the
period. The time will change in 15 minute increments.
5) Press the
System Time
button to change to the tempera-
ture flashing.
6) Press
or
buttons to change the temperature to
your selected temperature for the first heating period.
7) After you have set the time and temperature for the first
period, press
Schedule
to advance to the next program
period.
8) Repeat steps 4 through 7 until all of the program times
and temperatures are entered for all program periods for
that day.
9) Press
Schedule
button to change to the next day and
repeat steps 4 through 8 until all program days and peri-
ods are entered.
10)When programming is complete and all of the times and
temperatures match your desired heating schedule, press
RunSched
. The thermostat will now run your program.
Enter the Cooling Program
1) Press the SYSTEM button until the
Cool
icon appears.
2) Follow
Enter Heating Program
instructions for entering
cooling times and temperatures.
Automatic Schedule
This feature provides a method to program every day with the
most popular time and temperature settings using one key.
For this feature to be available, the Auto Schedule options
(Installer/Configuration menu item 16,
AS Heat
, or item 17,
AS Cool
) must be selected
On
.
To use Auto Schedule, press
RunSched
to be sure you are in
normal operating mode. In SYSTEM Heat mode, use the keys
to select your “Comfort Temperature”. When your “Comfort
Temperature” is selected, press
Auto Sched
button. The
Auto Schedule
key will disappear to indicate that the Auto
Schedule command has been accepted.
In Heat mode the thermostat will maintain your “Comfort Tem-
perature” during the Morning, Day and Evening periods and
setback 6° for the Night. Morning period will begin at 6:30 AM
and Night period will begin at 10:30 PM.
To set the Auto Schedule temperature for Cool mode, press
SYSTEM to change the mode to Cool and repeat setting the
temperature. In Cool mode, the thermostat will maintain your
selected “Comfort Temperature” continuously.
The “Comfort Temperature” can be temporarily overridden
by changing the setpoint temperature using the
or
buttons. Once Auto Schedule has been set and the key has
disappeared, it can be reset in the Installer/ Configuration
menu.
Entering Fan Program
The fan can be programmed to turn on at the beginning of a
period and remain on through the whole period. In
RunSched
mode when the
FAN
switch indicates
Prog Fan On
the fan is
programmed to be on for the period.
1) Press
System
button to select either
Heat
or
Cool
.
2) Press
Menu
button and then press
Fan
button to the right
of the display.
3) The top of the display will show the day(s) being pro-
grammed. The first period to be programmed will appear.
4) Press the
Fan
button to change from Auto to Prog.
5) Press the
Fan
button to the right of the display to change
to the next period.
6) Repeat steps 4 and 5 to program the fan for all periods of
the day.
7) Press Fan to advance to the next day of the week and
repeat steps 4 through 7 to program the fan for all days of
the week.
PROGRAMMING
Содержание White Rodgers 1F95-0680
Страница 15: ...15 NOTES ...