Model
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Instruction Manual
Infrared Thermometer
R2001
reedinstruments
www
com
Warning
Do not point laser directly or indirectly (through reflective surfaces) at eye.
Features
• Safely measure surface temperatures of hot, hazardous or
hard-to-reach objects without contact
• User selectable °F or °C
• Built-in laser pointer identifies target area
• 8:1 Distance to Spot Size ratio
• Fixed emissivity covers 90% of all applications
• Automatic Data hold
• Display backlight
• Low battery indication with auto shut off
• Includes battery
Specifications
Temperature Range:
-58 to 536°F (-50 to 280°C)
Accuracy:
±2% or ±2°C
Resolution:
1°F or (°C)
Response Time:
≤ 0.8s
Emissivity:
0.95 Fixed
Optical Resolution:
8:1
Spectral Response:
5 to 14μm
Power Supply:
9V (included)
Dimensions:
3.7 x 2.1 x 1” (94 x 56 x 28mm)
Weight:
2.7 oz (76g)
Instruments Description
1. LCD Display
5. Laser
2. Back Light Button
6. Infrared Lens
3. Laser Button
7. Measuring Trigger
4. °C / °F Button
8. Battery Cover
Display Description
1. Laser Signal
2. Data Hold Icon
3. Low Battery Symbol
4.
°C / °F Symbol
5. Current Temperature
Optical Resolution Information:
1. When taking measurements, point thermometer toward the de-
sired object and hold the trigger. The object should be larger than
the spot size.
2. Optical Resolution: As the distance from the object increases, the
measuring spot size area becomes larger.
3. Field of view: Make sure the target is larger than the unit’s spot
size. The smaller the target the closer you must be. When accuracy
is critical, make sure the target is at least twice as large as the spot
size.
4. Emissivity: Most organic materials, painted or oxidized surfaces
have an emissivity of 0.95 (pre-set in the unit). Inaccurate readings
will result from measuring shiny or polished metal surfaces. To
compensate, cover the surface to be measured with masking tape
or black paint. Measure the covered surface when it reaches the
same temperature as the material underneath.
Introduction
Compact, rugged and easy to use. Just aim and push the button, it reads
current surface temperatures in less than a second press the trigger to
display reading & battery icon. Release the trigger and the reading will
hold for 15 seconds.
How it works
The Infrared thermometer measures the surface temperature of an object.
The unit’s optical sensor emits, reflects, and transmits energy which is
collected and focused onto a detector. The unit’s electronics translate the
information into a temperature reading which is displayed on the unit.
Cautions
Infrared thermometers should be protected from the following:
1. EMF (electro-magnetic fields) from arc welders, induction heaters.
2. Thermal shock (caused by large or abrupt ambient temperature
changes, it allows 30 minutes for unit to stabilize before use).
3. Do not leave the unit on or near objects of high temperature.
Maintenance
1. Lens cleaning: Use compressed air to blow off loose particles, use
a soft brush to remove debris away, and clean it with damp cotton
cloth.
2. Case cleaning: Clean the case with a damp sponge/cloth and mild
soap.
3. Do not use solvent to clean lens.
4. Do not submerge the unit in water.
Battery Replacement
1. Pull battery cover away from unit
2. Replace with battery respecting the polarity 9v.
For service on this or any other REED product or information on other REED products,
contact REED Instruments at [email protected]
