manualshive.com logo in svg

Emerson Rosemount TCL, Руководство пользователя

Поделиться
Скачать
Emerson Rosemount TCL Скачать руководство пользователя страница 42

6.

To return to the main menu, press MENU. To return to the main display, press MENU
and then EXIT.

6.4

Security

6.4.1

How the security code works

Security codes prevent accidental or unwanted changes to program settings or
calibrations. There are three levels of security.

1.

A user can view the default display and diagnostic screens only.

2.

A user has access to the calibration and hold menus only.

3.

A user has access to all menus.

1.

If a security code has been programmed, pressing MENU causes the security screen
to appear.

2.

Enter the three-digit security code.

3.

If the entry is correct, the main Menu screen appears. The user has access to the sub-
menus the code entitles him to.

4.

If the entry is wrong, the Invalid code screen appears.

6.4.2

Assigning security codes

See 

Section 7.7

.

6.4.3

Bypassing security codes

Call the factory.

Display and operation

34

 Rosemount TCL

Содержание Rosemount TCL













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды