Emerson Rosemount 3408, Справочное руководство, Страница: 51 / 104

Table 6-3: Device Status Images in UIP
Device status image Category Description Action
Good No active alert. N/A
Failure At least one Failure alert is
active. Click the device status image to
open a window with active alerts
together with recommended
actions.
Function Check At least one Function Check alert
is active (and no Failure alerts).
Out of
Specification At least one Out of Specification
alert is active (and no Failure or
Function Check alerts).
Maintenance
Required At least one Maintenance
Required alert is active (and no
Failure, Function Check, or Out
of Specification alerts).
6.5 Smart echo level test
The function allows you to test the behavior of the transmitter in a real tank environment
without raising the level. During the test, a virtual surface echo is superimposed onto the
radar signal, and the transmitter will output a level corresponding to the echo position.
The test verifies the integrity of the signal processing, and can be used to test the alarm
limits in the host system, output of the transmitter, and transmitter configuration (for
example the upper/lower range values).
6.5.1 Configure the smart echo level
Prerequisites
This test is available for transmitters with:
• Option code ET
• Rosemount Radar Master Plus
Procedure
1. Select Service Tools
→
Proof Test .
Reference Manual Operation and maintenance
00809-0100-4418 September 2022
Rosemount 3408 Level Transmitter 51