Emerson Rosemount 3408 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 104

Emerson Rosemount 3408 Скачать руководство пользователя страница 40

WARNING

Process leaks could result in death or serious injury.

Ensure that the transmitter is handled carefully. If the process seal is damaged, gas might
escape from the tank.

5.2

Overview

This chapter provides information about configuration and configuration tools. Appendix

Configuration parameters

provides extended information about the configuration

parameters.

5.3

Configuration tools

•

Field Device Integration (FDI) compliant systems

•

Device Descriptor (DD) compliant systems

•

Device Type Manager (DTM

™

) compliant systems

•

Emerson's configuration tools with Bluetooth

®

wireless technology capabilities

5.4

Confirm correct device driver

Procedure

1. Verify that the correct FDI/DD/DTM Package is loaded on your systems to ensure

proper communication.

2. Download the latest FDI/DD/DTM Package at

Emerson.com/DeviceInstallKits

or

FieldCommGroup.org

Related information

NAMUR NE 53 revision history

5.5

Rosemount Radar Master Plus

Rosemount Radar Master Plus is the recommended tool for configuration. It is a User
Interface Plug-in (UIP) that includes basic configuration options, as well as advanced
configuration and service functions. An FDI or DTM compliant host is needed to run
Rosemount Radar Master Plus.

Related information

Emerson.com/RosemountRadarMasterPlus

Configuration

Reference Manual

September 2022

00809-0100-4418

40

Emerson.com/Rosemount

«
...
38
39
40
41
42
...
»

Содержание Rosemount 3408









































































































Отзывы:

Нет отзывов