Emerson Rosemount 326L, Быстрый старт

Страница: 19 / 52

2. Slip the supplied O-ring onto the probe connection of the unit and check its
position.
3. Screw the probe to the unit and tighten it.
Note
Recommended tightening torque: 4.79 ft/lbs (6.5 Nm).
4. Ensure that the O-ring has not moved from its original position. Replace the O-ring
if necessary.
Note
In cases with strong vibrations or moving viscous medium, it might be necessary to
secure the probe connection using screw retaining compound. In this case, ensure
that the compound is harmless because it might migrate into the medium.
5. If the probe length was modified, measure and record the probe length.
a) Precisely measure the length of the probe starting from the lower edge of
the process connection.
b) Record the length of the probe. It is needed for setting up the device
parameters.
For more information on setting the length of the probe in the device parameters,
see
Enter probe length .
2.2.3 Install the level transmitter
Install the level transmitter using these steps. Take note of the different process
connections.
CAUTION
Consider the potential dangers related to extreme machine and medium temperatures.
Quick Start Guide Installation
00825-0100-4326 January 2019
Quick Start Guide 19