Emerson Rosemount 326L, Быстрый старт

Страница: 30 / 52

3. Press
Enter
to select a parameter.
4. Press the up or down buttons for at least one second.
After one second the parameter value changes. Press and hold the button to
change the value continuously.
5. Press Enter .
The level transmitter saves the new value.
6. Repeat steps 2 - 5 to modify other parameters.
After 30 seconds of inactivity, the menu returns to the process view display.
3.3.3 Change menu level
Perform these steps to move to the next menu level.
Procedure
1. Press
Enter
to get to the menu.
2. Press up or down until the menu displays EF .
3. Press
Enter
.
The display shows the next menu.
3.3.4 Lock or unlock the menu
Lock the menu to prevent unintentional changes to the parameters. By default, the menu
is unlocked. When the menu is locked, it briefly displays
Loc when you attempt to change
a parameter value.
Prerequisites
The level transmitter must be in normal operating mode.
Procedure
1. Press and hold the up and down buttons simultaneously for 10 seconds.
The menu is locked and it displays Loc .
2. To unlock the menu, press and hold the up and down buttons for 10 seconds.
The menu is unlocked and it displays uLoc .
3.4 Setup the level transmitter
Procedures in this section provide instructions for configuring the settings and parameters
of the level transmitter.
3.4.1 Enter probe length
Enter the length of the probe into the parameters to ensure accurate level measurements.
Procedure
1. Apply operating voltage.
Operation Quick Start Guide
January 2019 00825-0100-4326
30 Quick Start Guide