manualshive.com logo in svg

Emerson Rosemount 3095, Справочное руководство, Страница: 81 / 130

Поделиться
Скачать
Emerson Rosemount 3095 Скачать руководство пользователя страница 81

Reference Manual 

00809-0100-4716, Rev JA
May 2008

4-3

Rosemount 3095 MultiVariable

FIELDBUS

1.

Install the NI-FBUS Communications Manager Driver Software from 
the National Instruments CD.  

a. Insert the NI-FBUS Communications Manager Driver CD.

b. Windows should detect the presence of a CD and start the 

installation program. Follow the onscreen prompts to finish the 
installation. If Windows does not detect the presence of a CD, use 
Windows Explorer or My Computer to view the contents of the 
CD-ROM, and then double click the SETUP.EXE program.

c. Click the Install NI-FBUS Software button.

d. Follow the Installation wizard to complete the installation process.  

e. The second installation screen asks for a serial number.  The serial 

number is not needed, click Next.  A pop-up comes up and says 
that you have entered an invalid serial number, and asks if you 
would like to enter a valid serial number, click No.

f. Continue to follow the installation wizard.

g. A licensing and activation pop-up will appear. No serial number or 

activation code is needed. 

h. This wizard will prompt the user to restart the computer once the 

installation is completed.

i. When computer reboots, the Add Interface Wizard will appear, 

continue with the instructions in step 2 before using this screen.

2.

Insert the PCMCIA card and install the New Hardware.

a. Insert the PCMCIA Card into the PCMCIA slot.

b. The Windows New Hardware Installation wizard will appear. 

Choose Yes this time only, and continue with the installation 
wizard.

3.

Install the Driver for the National Instruments (NI) PCMCIA-FBus 
interface card. 

a. Return to the Add Interface Window.  Follow the wizard to 

complete the installation of the PCMCIA card.  If the software does 
not run automatically navigate to Start > All Programs > National 
Instruments > NI-FBUS > Utilities > Interface Configuration Utility. 
Click the Add Interface button and choose the PCMCIA Interface 
type. 

Содержание Rosemount 3095



































































































































Отзывы:

Нет отзывов