manualshive.com logo in svg

Emerson MP105A4, Руководство пользователя

Emerson MP105A4 - портативный аудио плеер с ярким дисплеем. Ищете Руководство пользователя? На нашем сайте можно скачать его бесплатно. Получите информацию о функциях и настройках этого устройства, загрузив Руководство пользователя с manualshive.com.

Поделиться
Скачать
background image

Safety 

Information

Product 

information

Mechanical 

Installation

Electrical 

installation

Getting 

started

Basic 

parameters

Running the 

motor

Optimization

SMARTCARD 

operation

Onboard 

PLC

Advanced 

parameters

Technical 

data

Diagnostics

UL 

information

Mentor MP User Guide                                                                                                                                                                         

151

Issue: 3                                                                       www.controltechniques.com

Table 12-9 Acoustic noise data

 

* The acoustic noise figure for frame sizes 2C and 2D has been taken 
with the bottom right angle ducting removed.

12.1.21     Overall dimensions

Refer to section 3.4

Mounting method

on page 17.

12.1.22     Weights

Table 12-10 Overall drive weights

12.2      Cable and fuse size ratings

Maximum continuous input currents are given in section 2.1

Ratings

on 

page 6 to aid the selection of fuses and cabling. The maximum input 
current is dependent on the ripple content of the output current. A value 
of 100% ripple has been assumed for the given ratings.
The cable sizing selected when installing a Mentor MP must comply with 
the local wiring regulations. The information provided in this section is 
provided for guidance purposes only. 
The power terminals on Mentor MP frame size 1 drives have been 
designed to accommodate a maximum cable size of 150mm

2

 (350kcmil) 

with a temperature of 90°C (194°F). 
The power terminals on Mentor MP frame size 2A drives have been 
designed to accommodate a maximum cable size of 2 x 150mm

2

 (2 x 

350kcmil) with a temperature of 75°C (167°F). 
The power terminals on Mentor MP frame size 2B drives have been 
designed to accommodate 2 x 240mm

2

 with a temperature of 90°C 

(194°F). The use of cables sized using the US national electrical code as 
shown in Table 12-13 requires the use of a terminal adaptor.
The power terminals on Mentor MP frame size 2C and 2D drives have 
been designed for use with busbars. The drive can be used with cables 
as shown in Table 12-13 with the use of a terminal adaptor.
The actual cable size depends on a number of factors including:
•

Actual maximum continuous current

•

Ambient temperature

•

Cable support, method and grouping

•

Cable voltage drop

In applications where the motor used is of a reduced rating, the cable 
sizing selected can be appropriate for that motor. To protect the motor 
and the output cabling the drive must be programmed with the correct 
motor rated current.

 

When using reduced cable sizes, the branch circuit protection fuse rating 
needs to be reduced in line with the cable size selected.
The following table shows typical cable sizes based on USA and 
International standards, assuming 3 conductors per raceway/conduit, an 
ambient temperature of 40°C (104°F) and applications with high output 
current ripple content. 

Table 12-11 Typical cable sizes for size 1 drives

 

1. The maximum cable size is defined by the power terminal housing 

using 90°C (194°F) rated cables as per Table A.52-5 of the standard.

2. Assumes the use of 75°C rated cables, as per Table 310.16 of the 

National Electrical Code.

The use of higher temperature rated cable would allow a reduction on 
the minimum recommended cable size for Mentor MP shown above. For 
high temperature cable sizing, please contact the supplier of the drive.

Model

Frame 

Size

SPL at 1m 

(dBA)

MP25A4(R)              

MP25A5(R)

1A

No fans 

installed

MP45A4(R)         

MP45A5(R)

MP75A4(R)               

MP75A5(R)

43

MP105A4(R)       

MP105A5(R)

1B

56

MP155A4(R)          MP155A5(R)
MP210A4(R)           MP210A5(R)
MP350A4(R)       

MP350A5(R)

MP350A6(R)

2A

68

MP420A4(R)          MP470A5(R)

MP470A6(R)

MP550A4(R)
MP700A4(R) MP700A5(R)

MP700A6(R)

2B

MP825A4(R)

 MP825A5(R)

MP825A6(R)

MP900A4(R)         

MP1200A4            

MP1200A5

MP1200A6

2C

67*

MP1850A4           

MP1850A5

MP1850A6

MP1200A4R          MP1200A5R

MP1200A6R

2D

MP1850A4R           

MP1850A5R

MP1850A6R

Model

Frame 

size

kg

Ib

MP25A4

MP25A5

1A

10

22

MP45A4

MP45A5

MP75A4

MP75A5

10.1

22.3

MP25A4R

MP25A5R

10.2

22.5

MP45A4R

MP45A5R

MP75A4R

MP75A5R

10.5

23.1

MP105A4

MP105A5

1B

12.6

27.8

MP155A4

MP155A5

MP210A4

MP210A5

MP105A4R

MP105A5R

13.0

28.7

MP155A4R

MP155A5R

MP210A4R

MP210A5R

MP350A4

MP350A5

MP350A6

2A

35

77.2

MP420A4

MP470A5

MP470A6

MP550A4

MP350A4R

MP350A5R

MP350A6R

38

83.8

MP420A4R

MP470A5R

MP470A6R

MP550A4R

MP700A4

MP700A5

MP700A6

2B

41

90.4

MP825A4

MP825A5

MP825A6

MP900A4

MP700A4R

MP700A5R

MP700A6R

46

101.4

MP825A4R

MP825A5R

MP825A6R

MP900A4R

MP1200A4

MP1200A5

MP1200A6

2C

100

220.5

MP1850A4

MP1850A5

MP1850A6

MP1200A4R

MP1200A5R

MP1200A6R

2D

138

304.2

MP1850A4R

MP1850A5R

MP1850A6R

NOTE

The selection of the correct fuse is essential to ensure the 
safety of the installation

Model

IEC 60364-5-52

[1]

UL508C/NEC

[2]

Input

Output

Input

Output

MP25A4(R)

MP25A5(R)

2.5mm

2

4mm

2

8 AWG

8 AWG

MP45A4(R)

MP45A5(R)

10mm

2

10mm

2

4 AWG

4 AWG

MP75A4(R)

MP75A5(R)

16mm

2

25mm

2

1 AWG

1/0 AWG

MP105A4(R)

MP105A5(R)

25mm

2

35mm

2

1/0 AWG 1/0 AWG

MP155A4(R)

MP155A5(R)

50mm

2

70mm

2

3/0 AWG 4/0 AWG

MP210A4(R)

MP210A5(R)

95mm

2

95mm

2

300kcmil 350kcmil

WARNING

NOTE

NOTE

Содержание MP105A4























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MP105A4

Saci STM/T10DP Manual preview
STM/T10DP
Бренд: Saci Страницы: 40
Ricoh MP9120A User Manual preview
MP9120A
Бренд: Ricoh Страницы: 38
D+H VLD 51/038 Original Instructions Manual preview
VLD 51/038
Бренд: D+H Страницы: 12
GORBEL G-Force iQ Series Installation & Operation Manual preview
G-Force iQ Series
Бренд: GORBEL Страницы: 60
D+H LDx-1400-1-ACB Manual preview
LDx-1400-1-ACB
Бренд: D+H Страницы: 24
Lenovo ThinkPad 43N3201 User Manual preview
ThinkPad 43N3201
Бренд: Lenovo Страницы: 46
Lenovo ThinkPad 40Y8626 User Manual preview
ThinkPad 40Y8626
Бренд: Lenovo Страницы: 58
Lenovo ThinkCentre 41N5624 User Manual preview
ThinkCentre 41N5624
Бренд: Lenovo Страницы: 66
Lenovo ThinkCentre 41N5626 User Manual preview
ThinkCentre 41N5626
Бренд: Lenovo Страницы: 72
Lenovo ThinkPad 41N5643 User Manual preview
ThinkPad 41N5643
Бренд: Lenovo Страницы: 46
Lenovo ThinkPad 40Y8706 User Manual preview
ThinkPad 40Y8706
Бренд: Lenovo Страницы: 62
Lenovo ThinkPad 40Y8710 User Manual preview
ThinkPad 40Y8710
Бренд: Lenovo Страницы: 68
Lenovo ThinkPad 390 Setup Manual preview
ThinkPad 390
Бренд: Lenovo Страницы: 70
Lenovo ThinkPad 390X (Japanese) Setup Manual preview
ThinkPad 390X
Бренд: Lenovo Страницы: 6
Overland Storage ARCvault Series Remove & Replace Instructions preview
ARCvault Series
Бренд: Overland Storage Страницы: 4
ABB SMISSLINE F454 Operation And Assembly Instructions preview
SMISSLINE F454
Бренд: ABB Страницы: 2
ABB RSYC-01 User Manual preview
RSYC-01
Бренд: ABB Страницы: 40
ABB ACS850 series Quick Installation Manual preview
ACS850 series
Бренд: ABB Страницы: 82

Бренды по названию

Популярные бренды

Загрузить еще бренды