Emerson Machinery Health Expert CSI 2600, Руководство пользователя

Страница: 80 / 110

Input Power LED
The Input Power LED indicates the status of the power converters that distribute various
voltages within the 6560 Processor module. A steady green color indicates that all power
converters are within the proper voltage ranges, while a steady or blinking red condition
indicates a power fault somewhere inside the 6560 Processor module.
CPU Status LED
The CPU Status LED indicates the status of the Main Processor board. The four status
conditions are listed in
Table A-5 along with their assigned priorities.
More than one status condition may be active at one time. When this happens, the LED will
indicate the active status condition with the highest priority. For example, if the module is
both
Uncalibrated (Priority 3) and is also currently In POST (Priority 1), the LED would indicate
In POST .
CPU status conditions Table A-5:
LED Color Status Priority Comments
Blinking Green In POST 1 Typically only seen during system startup. Indicates
that POST (Power On Self Test) is being performed,
which involves Processor board resources.
Solid Red Failure 2 Power supply POST failure, or other hardware
failure on processor board.
Alternating Red/
Green Uncalibrated 3 The onboard Test Function generator is
uncalibrated.
Solid Green OK 4 Normal operation.
Transient Status LED
The Transient Status LED indicates the status of the Transient Daughterboard. The LED is
always off when a Transient board is not installed in the system. The four status conditions
are listed in
Table A-6 with their assigned priorities.
More than one status condition may be active at one time. When this happens, the LED will
indicate the active status condition with the highest priority.
Transient Daughterboard status conditions Table A-6:
LED Color Status Priority Comments
Blinking Green In POST 1 Typically only seen during system startup. Indicates
that POST (Power On Self Test) is being performed,
which involves Processor board resources.
Solid Red Failure 2 Power supply POST failure, or other hardware
failure on processor board.
Alternating Red/
Green Uncalibrated 3 One or more Transient channels are uncalibrated.
Specifications
76 MHM-97453, Rev 1