
Complete list of boot flags
(continued)
Table 5-8:
Boot Flag
Description
0x0040
Use BOOTP to get boot parameters (network boot only).
0x0080
Use TFTP to get boot image (network boot only).
0x0100
Use Proxy ARP (network boot only).
0x0200
Ignore BOOTROM update image in FLASH (for testing).
0X0400
Change Ethernet speed from 100 Mbps to 10 Mbps (Main Processor only).
0x0400
Redirect the console I/O to COM1 (Transient only).
0x0800
Disable boot file update in FLASH (for development).
0x0800
Boot over a WAN, requiring extended FTP timeouts. This flag applies only if one of
three flags is set: 0x1000, 0x2000, 0x4000.
0x1000
Attempt network, fallback on FLASH boot (legacy 4500 mode).
0x2000
Boot ALWAYS from network, never fallback on FLASH.
0x4000
Boot ONCE from network. This flag clears itself after one boot.
5.7.6
Subnet masks
A subnet mask is normally represented in Windows as a series of four decimal numbers,
each of which can have a value from 0 to 255, separated by periods (255.255.248.0).
In the 6560 Processor module, the subnet mask is represented as a series of four
hexadecimal pairs with no separators (that is, 255.255.248.0 is represented as fffff800). A
hexadecimal conversion table can be used to convert the subnet mask numbers from
decimal to hexadecimal. The calculator in the Windows Accessories folder will also
perform this conversion when it is set to Programmer Mode.
5.7.7
Specify a subnet mask
The subnet mask on a 6560 Processor module defaults to 255.255.255.0 (ffffff00).
Procedure
1.
The subnet mask should be set to match the subnet mask used on the server PC.
If they do not match, network communication failure is possible.
2.
On the configuration labeled
inet on ethernet
, enter the IP address of the unit followed
by a colon and then the subnet mask in the hexadecimal format.
Software configuration
MHM-97453, Rev 1
57
Содержание Machinery Health Expert CSI 2600
