HE.14138_H © 09/2011
3
Abb. ähnlich / pic. similar
WORK
SERVICE
DON´T DO
General
safety rules
AHP 700-L
GB
Instruction Manual Battery-hydraulic Pump
authorised
copy
3. Description of the electro-hydraulic pumping unit
3.1 Description of the components
The electro-hydraulic pumping unit consists of the following components:
Table 3
(see pic.1)
Pos. Description
Function
1
Battery (RAL40/BL1840)
rechargeable 4Ah Li-Ion battery (RAL40/BL1840)
Optional:
mains adapter NG2230
2
battery lock
Slide to unlock the battery
3
Emergency stop button
To reset the crimping, cutting and punching tools into the starting
position in case of an error.
4
Compartment
~ e.g. for remote control and/or carrying belt
5
Male plug
Male plug to connect to a female plug on the hose
6
Socket
for remote control, safety foot switch, two hand control and other
controls
7
Oil plug
Oil plug with inspection glass for the hydraulic oil
8
Program selection switch
Turning knob for the selection of special programs for crimping,
cutting, punching as well as a position to read out data.
9
OLED Display
High tech organic display to indicate tool and crimping/cutting data
10
LED (red)
Indicator for Battery charge, Service Intervals and faults
11
Forward and return keys
To start/stop the working cycle
3.2 Brief description of the important features of the unit
The unit is equipped with a special brake which stops the forward motion of the piston/dies when the trigger is re-
leased.
Through an optional USB adapter a report can be generated at the end of a working session at a PC documenting
the proper function of the unit.
