Installation, Operation and Maintenance Manual
VCIOM-02377-EN Rev. 0
May 2022
23
Communication Interface
Section 8: Communication Interface
Opening/Closing speed sent
from DeviceNet interface
Opening/Closing speed set
into actuator logic
0
4
1
4
2
4
3
4
4
4
5
6
6 (default)
6 (default)
7
6
8
8
9
8
8.8
EDS File
The DeviceNet interface module is provided with an Electronic Data Sheet (EDS) file. The
EDS file is DeviceNet specific and provides information about the device configuration data.
The EDS file is used by the DeviceNet configuration tool in order to get all the information
necessary to the device configuration and to access and alter the configurable parameters
of the EPI2 actuator.
When the DeviceNet Interface tries to set opening/closing speeds, actuator logic sets
values in function of Table 25.
Table 25.
NOTE:
New version of EPI2 has only the opening/closing torque 2, 5 and 9,
(see Installation, Operation and Maintenance Manual for Keystone EPI2, Electric Actuator).
8.7
DeviceNet Configurable Parameters
For correct communication and identification of the actuator, it is required to configure the
correct MACID and Baud Rate.
Table 23.
Parameter 17: Class 3; Instance 1; Attribute 1
Table 24.
Parameter 18: Class 3; Instance 1; Attribute 2
Indication
Description
Direction Data type
Range
Default
E.U.
MACID
The MACID to assign to
the device
R/W
Unsigned
0-63
63
-
Indication
Description
Direction Data type
Range
Default
E.U.
Baud rate
The Baud Rate to assign to
the device
R/W
Unsigned
0-2
0
-
