Emerson IC200CX EVO, Руководство пользователя

Страница: 5 / 62

IC200CX EVO
user manual
5
2.1 On­board keyboard
The user interface consists of an on­board keyboard with a two­line and six­button LCD display.
Through the display you can view the values measured by the unit probes, the status of the physical
outputs as well as informations about the unit (number of operating hours, number of compressor
starts) and faults. Authorized personnel can access to password protected parameters programming,
e.g. change unit settings or enable additional functions. The activation of the main components
(compressor, fan, pump, heater) is indicated by icons.
load status
(compressors, fans, pumps)
temperature unit of measure
clock
pressure unit of measure
working mode icons
active functions
alarms and flow
switch
2
2.2 Display and icons
ON when a temperature or pressure is visualized
Real time clock: ON when the bottom display show the RTC
ON during the programming with time based parameter value
In function menu indicates the defrost delay counting
General alarm: blinking in case of alarm
ON when domestic hot water production is active
ON in defrost
Blinking during defrost activation delay
Antifreeze heaters/integration heating/boiler: ON if the heaters are switched ON
Water flow alarm: blinking in case of water flow alarm
Water pump: ON if at least one water pump is active
USER INTERFACE