IC200CX EVO
user manual
37
10.3 How to enter in programming mode in levels Pr2Pr3
Simultaneously press the and buttons
for 3 sec; the upper display shows the PAS label and
the lower display shows the "
Pr1
" label (level Pr1).
Press and hold the key for 3 seconds, the label
"
Pr2
" will appear on the lower display (Pr2 level).
3 seconds
Press and hold the key for another 3 seconds,
the label "
Pr3
" will appear on the lower display (Pr3
level).
3 seconds
3 seconds
10.4 How to change the value of a parameter
Enter the parameter programming as described in the
previous paragraphs, use the arrow keys to select the
desired parameter group (eg
St
thermoregulation
parameters). Confirm with .
The first parameter of the selected group will appear,
with its current value.
The password is entered as in the case of access to the
parameter level Pr1.